How To Operate Your Ceiling Fan - Fanimation AIRE DELUXE FP6245B Serie Manual Del Usuario

How to Assemble Your Light Kit Assembly (Continued)
4. Assemble the light kit assembly to the adapter
switch housing using the previously removed screws
and securely tighten all screws. (Figure 4)
5. Insert light bulbs into sockets. (Figure 5)
CAUTION
To reduce the risk of electric shock, disconnect the
electrical supply circuit to the fan before installing
your light kit.
NOTE: When relamping is required, USE ONLY
MAX 9W, TYPE E26 DIMMABLE LISTED LED
(LIGHT) BULB.
CAUTION
RISK OF FIRE. USE ONLY LED LAMPS IN THIS LIGHT
KIT. INCANDESCENT AND HALOGEN LAMPS MAY
CAUSE SEVERE THERMAL DAMAGE.
6. Disassemble the finial, trim cover and nut in light kit
assembly. Securely attach the glass to light kit
assembly using supplied nut, trim cover and finial. Do
not over tighten. (Figure 6)
1.
Restore electrical power to the outlet box by turning
the electricity on at the main fuse box. (Figure 1)
WARNING
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not operate
fan until the blades are in place. Noise and fan damage
could result.

How to Operate Your Ceiling Fan

Bulb
Light Kit Assembly
14
Light Kit Assembly
Figure 4
Light Kit
Assembly
Figure 5
Glass
Nut
Trim Cover
Finial
Figure 6
Main Fuse Box
Figure 1