Siemens SITRANS FUS380 Manual Del Usuario página 5

Start-up routine
Display menu sequence
Table 1 Display menus
Menu Description
1 Flow volume totalizer 1 - forward
2 Flow volume totalizer 2 - reverse (optional)
3 Current flow rate
4 Failure code F1 ... F9
5 Display test
Table 2 Information symbols
Symbol
Troubleshooting
Siemens A/S
SITRANS FUS / FUE380
Flow Instruments
A5E01674564, 05/2010
DK-6430 Nordborg
www.siemens.com/flow
SITRANS FUS / FUE380
SFIDK.PQ.029.C2.6Z, 05/2010
Description
Power supply connected
Warning
A displayed indicates a fault
For more troubleshooting information refer to the Operating Instructions of the device
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions. Responsibility for suitability and intended use of this instrument rests solely with the user.
Copyright © Siemens AG 05.2010 All Rights Reserved. Technical data subject to change without prior notice.
Symbol Description
Battery status, full
Battery status, low
5