EDELRID FLEX LITE Manual De Instrucciones página 26

Declaration of Conformity:
EDELRID GmbH & Co. KG herewith declares that the
article is in conformity with the applicable pertinent
requirements and regulations of the EU Regulation
2016/425. The original declaration of conformity
may be downloaded from the following website:
http://www.edelrid.de/...
Remarks
Instructions for use: CE XXXX: Notified body respon-
sible for issuing of the EU Type Approval Certificate
of the product.
Our products are manufactured with the utmost
care. However, should any of our products give cause
for a justified complaint, please advise us of the lot
number.
We reserve the right to make technical amendments.
ANSI additional information
- The Instructions for Use must be provided to the
user of this equipment.
- The Instructions for Use for each item of equipment
used in conjunction with this product must be fol-
lowed.
- Rescue plan: You must have a rescue plan and the
means to rapidly implement it in case of difficulties
encountered while using this equipment.
- WARNING: when using multiple items of equip-
ment, a dangerous situation can arise in which the
safety function of an item of equipment can be af-
fected by the safety function of another item of
equipment.
- WARNING: chemicals, heat, corrosion and ultravio-
let light can damage your harness. Contact Edelrid
if there is any doubt about the condition of this
product.
- Be vigilant when working near sources of electricity,
moving machinery or abrasive or sharp surfaces.
Appendix A – ANSI/ ASSE Z359.11
ANSI/ASSE Z359 Requirements for proper use and
maintenance of full body harnesses
Note: these are general requirements and informa-
tion provided by ANSI/ASSE Z359; The manufactur-
er of this equipment may impose more stringent re-
strictions on the use of the products they manufac-
ture, see the manufacturer's instructions.
1. It is essential that the users of this type of equip-
ment receive proper training and instruction, includ-
ing detailed procedures for the safe use of such
equipment in their work application. ANSI/ASSE
Z359.2, minimum requirements for a managed fall
protection program, establishes guidelines and re-
quirements for an employer's managed fall protec-
tion program, including policies, duties and training,
fall protection procedures, eliminating and con-
trolling fall hazards, rescue procedures, incident in-
vestigations and evaluating program effectiveness.
2. Correct fit of a full body harness is essential to
proper performance. Users must be trained to select
the size and maintain the fit of their full body har-
ness.
3. Users must follow manufacturer's instructions for
proper fit and sizing, paying particular attention to
ensure that buckles are connected and aligned cor-
rectly, leg straps and shoulder straps are kept snug
at all times, chest straps are located in the middle
chest area, and leg straps are positioned and snug
to avoid contact with the genitalia should a fall occur.
4. Full body harnesses which meet ANSI/ASSE
Z359.11 are intended to be used with other compo-