Thrustmaster T-LCM PEDALS Manual De Instrucciones página 4

ENGLISH:
BOOTLOADER METHOD: how to wake your pedal set if it is no longer
recognized on PC (i.e. in the event of firmware loss)
Required system: PC running Windows® 8 or 10.
1. If you haven't already done so, install the PC DRIVERS package on your PC.
https://support.thrustmaster.com/en/product/t-lcm-pedals-en/
Available here:
2. Once the drivers have been installed, restart your computer.
3. After restarting the computer:
- Disconnect the USB plug from the computer
- Press the BOOTLOADER button (located on the rear of the pedal set), then
connect (without releasing the button) the USB plug to the PC.
- After connecting the USB plug to the PC, release the BOOTLOADER button.
4