Areas Of Responsibility; Initial Operation; How To Use - Würth WDM 30 Manual De Instrucciones

Würth WDM30.book Page 11 Wednesday, December 9, 2009 4:43 PM

Areas of responsibility

Area of responsibility of the
manufacturer of the original
equipment
Adolf Würth GmbH & Co. KG, D-74650
Künzelsau (hereafter Würth):
Würth is responsible for the safety-related
flawless delivery of the device, including the
operating instructions.
Würth is not responsible for accessories
produced by other manufacturers.
Area of responsibility of the operator
Caution
Damage to property due to repairing!
– In case of malfunctions, contact the dealer.
The operator is obliged to observe the
following:
He understands the protection information
on the device and the operating instruction.
He is familiar with the customary in-house
accident control directives.
Overview
Keys
See drawing A:
1 laser emitter
2 receiver lens
3 display
4 on/measure
5 room volume
6 clear/off
7 measuring plane/unit
8 area
Display
See drawing D:
9 measuring plane
10 area/room volume
11 battery symbol
12 second row
13 fractions/exponents
14 units
15 summary row

Initial operation

Insert the batteries
See drawing E:
– To ensure a reliable use, use exclusively
alkaline batteries.
– Remove battery compartment cover.
– Insert alkaline batteries (2 x AAA) pay
attention to the correct polarity.
– Close the battery compartment cover.
Changing the batteries
– Change the batteries when the battery
symbol is flashing permanently.

How to use

Measuring conditions
The quality of the measurement depends on the
surfaces to which you are measuring.
Measurement errors
Caution
Damage to property due to use of wrong measuring
results!
– Avoid measuring errors due to unexpected events
during distance measuring.
– Perform a control measurement.
Measuring errors are possible in case of:
colourless fluids (e.g. water)
clean, translucent glass
styrofoam or similar semi-translucent
surfaces
strongly reflecting targets that deflect the
laserbeam
measurements aimed at moving objects
11/136