Care And Maintenance Of Cordless Tools - Hilti SR 6-A22 Manual Del Usuario

Ocultar thumbs Ver también para SR 6-A22:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 47
4. Pull the contact shoe out.
5. Press the contact shoe lock button.
6. Insert the lightly greased contact shoe into the guide to the desired position.
The contact shoe can be used in three positions.
7. Check that the contact shoe has engaged.
8. Insert the saw blade. → page 18
5.4
Installing the dust removal adapter (accessory)
1. Pull the contact shoe out.
2. Set the dust removal adapter on the contact shoe mount.
3. Insert the lightly greased contact shoe fully into the guide.
5.5
Installing the scaffold hook (accessory)
1. Engage the transport lock.
2. Install the scaffold hook.
5.6
Inserting the saw blade
Use only saw blades with a 1/2" connection end.
1. Activate the transport lock or separate the battery from the power tool.
2. Check that the connection end of the accessory tool is clean and lightly greased. Clean it and grease it if
necessary.
3. Push the locking lever up as far as it will go and hold it in this position.
4. Push the saw blade into the chuck from in front.
5. Allow the locking lever to return to its original position.
6. Grip and pull the saw blade to check that it is locked in position.
5.7
Inserting the battery
WARNING
Electrical hazard! Risk of short circuiting.
▶ Before inserting the battery, check to ensure that the battery terminals and the contacts on the
reciprocating saw are free from foreign objects.
▶ Push the battery into the tool from the rear until it engages with an audible click.
5.8
Sawing
WARNING
Risk of injury! Caused by the saw continuing to run.
▶ Do not lift the product away from the workpiece until it has stopped completely.
▶ Wait until the product stops completely before you lay it down.
1. Disengage the transport lock and press the control switch.
2. Release the control switch when you finish the cut.
3. Engage the transport lock.
6

Care and maintenance of cordless tools

WARNING
Risk of injury with battery inserted !
▶ Always remove the battery before carrying out care and maintenance tasks!
18
English
Printed: 23.01.2018 | Doc-Nr: PUB / 5391390 / 000 / 01
6
7
8
5
2186514
*2186514*

Publicidad

Tabla de contenido
loading

Tabla de contenido