Key Features; What's In The Blister Pack - General MM1E Guia Del Usuario

The MMD5NP's front-panel bar graph of 10 LEDs measures
%WME (Wood Moisture Equivalent) over two different ranges:
7 to 15%, and 16 to 35%. A slide switch on the back of the
meter requires the user to choose the right range for the
material under test. The same switch functions as the power
switch. Whenever the meter is powered on, the bar graph
momentarily indicates remaining battery life. After powering
on, the meter's calibration can be checked by inserting the
test pins into holes in the pin protection cover.
The MM1E is powered by a "9V" battery included in the
blister pack.

KEY FEATURES

• 10-LED display
• 7 to 35% measurement range, with separate High
and Low scales
• Protective cap doubles as calibration checker
• Full Battery and Low Battery indications

WHAT'S IN THE BLISTER PACK

The MM1E comes in a plastic blister pack along with a "9V"
battery, a protective cover for the test pins and this user's
manual.
4