BQS BB FIX 012 Manual De Uso página 18

IMPORTANT
Read the instructions carefully before
installing the child seat in the vehicle.
NOTICE
1. Only suitable if the approved vehicle has been fitted with three-point safety
belts that meet ECE standard Nº 16 or equivalent.
2. Under no circumstances should the safety seat be installed in the front seat
of the car opposite the direction of travel if the car is equipped with an active
airbag.
3. Do not use this child safety seat in passenger seats equipped with airbags.
4. This child seat must be used WITH the harness system for children
weighing between 0 kg and 18 kg.
5. This child seat may be used WITHOUT the harness system for children
weighing between 15 kg and 25 kg.
6. Please read the instructions carefully, as incorrect installation could result in
serious injury. If any injuries should occur as a result of incorrect installation,
the manufacturer will accept no liability.
7. This child restraint system complies with the rules of Regulation ECE 44/04
and can be installed in most vehicles equipped with 3-point seat belts
aligned to ECE Regulation 16. Anyway, you should always test the seat in
your vehicle and with children on board before buying it, to ensure that this
model meets all your needs. Under no circumstances shall this seat be fitted
only with a 2-point lap belt.
8. Please consult the Compatible Vehicles leaflet attached if the manufacturer
or model of your vehicle is not included in the list,in order to ensure the child
seat's proper installation in the vehicle.
9. Please never use the safety seat without its cover or without the harness
protectors.
10. Fastening a child dressed in outerwear could reduce the efficiency of the
restraint system.
11. Make sure to protect the child safety seat from direct sunlight as it could heat
up and hurt the child.
12. Child seats or harness accessories that are damaged or have been used
incorrectly must be replaced.
18 BB FIX 012