Recycling - NDS ZERO WIRE DUO Manual De Instrucciones

CAUTION
1
This symbol alerts the user that important literature concerning the operation of this unit has
been included. Therefore, it should be read carefully in order to avoid potential problems.
This symbol warns user that un-insulated voltage within the unit may have sufficient magnitude to
cause electrical shock. Therefore, it is dangerous to make contact with any part inside the unit. To
reduce the risk of electric shock, DO NOT remove cover (or back).
parts inside.
To prevent fire or shock hazards, do not expose this unit to rain or moisture. Also, do not use this unit's
polarized plug with an extension cord receptacle or other outlets unless the prongs can be fully inserted.
The device is designed to meet the medical safety requirements for a patient vicinity device. This device
may not be used in connection with life support equipment.
Safety Compliance:
This device is T.U.V. approved WITH RESPECT TO ELECTRIC SHOCK, FIRE AND MECHANICAL
HAZARDS ONLY IN ACCORDANCE WITH UL 60601-1/CAN/CSA C22.2 NO. 601.1.
EEC Safety Compliance:
This device meets the requirements of EN-60601-1 so as to conform to the Medical Device
Directive 93/42/EEC (general safety information).
0673
FCC Identification:
UEZTZM7201
This device complies to the above standards only when used with the supplied medical grade power
supply.
Standard Power Supply:
24 Volt: Ault MW172KB2400F02 or Ault MW172KB2400B02
The device should be powered from a center tapped circuit when used in the US at voltages over 120 volts.
This product is intended for continuous operation.

Recycling:

Follow local governing ordinances and recycling plans regarding the recycling or disposal of this
equipment , or contact the Electronic Industries Alliance (www.eiae.org)
ii
If you experience problems with this device, please contact your supplier.
There are no user serviceable