Kobalt KRAD 1224B-03 Manual De Instrucciones página 9

OPERATING INSTRUCTIONS
3. Variable-speed Trigger Switch
a. To turn the right angle drill/driver ON, depress
the variable-speed trigger switch (E).
b. To turn it OFF, release the variable-speed
trigger switch.
c. The variable-speed trigger switch delivers
higher speed with increased trigger pressure
and lower speed with decreased trigger
pressure.
4. Two-Speed Gear Box
The right angle drill/driver has a two-speed gear
box designed for drilling or driving at either of two
different variable-speed ranges. A gear selector (B)
is located on the top of the right angle drill/driver to
select either 1 (Low) or 2 (High) speed.
Setting 1 will deliver lower speeds and increased
power and torque. Use setting 1 for heavy-duty
work or for driving screws.
Setting 2 will deliver higher speeds and reduced
power and torque. Use setting 2 for drilling wood
and wood composites and for using abrasive and
polishing accessories.
NOTICE: Never change gears while the tool is running. Failure to obey this caution could
result in serious damage to the right angle drill/driver.
5. Adjustable Torque
The right angle drill/driver torque can be adjusted
among 3 driving settings and 1 drilling setting.
The tool defaults to the drill mode. When the
variable-speed trigger switch (E) is first pressed, a
green light will shine in the torque indicator (F) to
indicate that the tool is in drill mode.
Press the torque button (G) one time to adjust the
tool to the drive setting.
1. The right angle drill provides lowest torque.
2. The right angle drill/driver provides medium
torque.
3. The right angle drill/driver provides maximum torque.
3
E
4
5a
G
9
B