Specification Chart; Safety Guidelines; Important Safety Instructions - Craftsman 919.167783 Manual De Instrucciones

All manuals and user guides at all-guides.com
Model No.
Running HP
Bore
Stroke High Pressure
Low Pressure
Voltage-Single Phase
Minimum Branch Circuit Re quire ment
Fuse Type
Air Tank Capacity - Gallons
Approximate Cut-in Pressure
Approximate Cut-out Pressure
Refer to Glossary for abbreviations
SAFETY GUIDELINES - DEFINITIONS
This manual contains information that is important for you to know and understand.
This information relates to protecting YOUR SAFETY and PREVENTING
EQUIPMENT PROBLEMS. To help you recognize this information, we use the
symbols below. Please read the manual and pay attention to these symbols.
Indicates an
imminently hazardous
situation which, if not avoided, will result
in death or serious injury.
Indicates a potentially
hazardous situation
which, if not avoided, could result in
death or serious injury.

IMPORTANT SAFETY INSTRUCTIONS

Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains
chemicals known to the State of California to cause cancer, birth defects or
other reproductive harm. Some example of these chemicals are:
• lead from lead-based paints
• crystalline silica from bricks and cement and other masonry products
• arsenic and chromium from chemically-treated lumber
Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, al ways wear
OSHA/MSHA/NIOSH approved, properly fi t ting face mask or res pi ra tor when
us ing such tools.
When using air tools, basic safety precautions should always be followed to
reduce the risk of of personal injury.

SPECIFICATION CHART

.
which, if not avoided, may result in
minor or moderate injury.
indicates a potentially hazardous
situation which, if not avoided, may
result in property damage.
3 - ENG
919-167783
1.6
2.375"
.54"
1.45"
120
15 amps
Time Delay
25 ASME
145
175
Indicates a potentially
hazardous situation
Used without the
safety alert symbol
A20361