Master audio NT Serie Manual Del Usuario página 23

Amate Electroacústica,s.l.
2.1. Configurations
2.1.1. Daisy chaining connection (Active models)
You may daisy chain as many units as required. Plug into the INPUT of the first unit
(from a Mixer's output). Then connect the LINK output (first unit) to the INPUT of the
second unit, and so on.
Fig.3. "daisy chaining" configuration
2.1.2. Connection with a passive subwoofer (Active models)
Plug into the INPUT of the cabinet (from a Mixer's output) and then use the LINK
output to carry the signal to the input of an amplifier, which will drive the passive
subwoofer.
Fig.4. Connection with passive subwoofer
NT Series.Version 1.2 Dec08
23