Safety Limiting Device - Sime LAGO EV Manual De Uso, Instalación Y Mantenimiento

EN
3.8

Safety limiting device

The appliances are equipped with a
thermostat with a safety limiting device
in line with current European standards.
Phase (L)(B)
Earth
(E)
terminal
Neutral (N)(A)
This must be carried out by qualified
personnel.
For normal types: the thermostat is
factory set to max. value.
m
WARNING
Before adjusting the heater
cover, make sure that the
thermostat's safety is in the
correct position. There is a
small button that may have
popped out. If this is the case,
the thermostat must be reset
for the appliance to work
correctly.
The limiting device is triggered in the
event water is abnormally overheated,
which then automatically switches off
the power supply.
The restart is manual.
(See fig. 7)
Thermostat
Thermal
terminals
Pilot
Pilot
light
light
m
1
Heating
element
2
WARNING
DO NOT CONNECT
APPLIANCE TO A POWER
SUPPLY UNTIL IT HAS BEEN
FILLED WITH WATER
Fig. 7
THE
47