Satco NUVO 65-244 Guia De Inicio Rapido

LED AREA LIGHT WITH
PHOTOCELL
Models: 65-244, 65-245
INSTALLATION AND SAFETY INSTRUCTIONS
IMPORTANT: Read before installing fixture. Retain for future reference.
WARNING:
Risk of Fire or Electric Shock
To reduce the risk of fire, electrical shock or injury to persons; read
•
and follow all warnings and installation instructions before installing.
• All installation should be performed by a qualified electrician.
• To avoid electric shock, ensure power is turned off before installation
or inspection. All wiring must be installed in accordance with Electrical
Code and local electrical code.
• To prevent fire, this fixture is rated for use in 100-277V, 50-60Hz
protected circuit and 90°C rated supply wire.
• To prevent product malfunction and/or electrical shock, this product
must be properly grounded.
To avoid damage and/or product malfunction, do not modify the
•
fixture or replace accessories without confirming with the supplier first.
• To prevent wiring damage or abrasion, do not expose wiring to edges
of sheet metal or other sharp objects.
• Suitable for wet locations.
IMPORTANT:
This product must be installed in accordance with the
applicable installation code by a person familiar with the construction
and operation of the product and the hazards involved.
INSTALLATION: Wall Mount
STEP 1: Unscrew the screws, remove
the Fixing Plate and Cover Plate.
Cover Plate
Fixing Plate
INSTALLATION: Pole Mount
STEP 1: Unscrew the screws, remove
the Cover Plate, then reset the screws.
Cover Plate
© Copyright 2019 Satco Products, Inc. 1/19
STEP 2: Drill holes in the wall as
shown and connect the fixture
according to the wiring diagram.
Secure fixture to wall with screws.
2.44 in
2.83 in
STEP 2: Connect the fixture
according to the wiring diagram.
Parts Included Quantity
Fixture 1
Optical Controller Cover 1
WIRING DIAGRAM
L L
(Black) (Black)
Input Output
N N
(White) (White)
STEP 3: Reset the Fixing Plate and the
Cover Plate with the screws. Tighten
the screws in a clockwise direction to
complete the installation.
STEP 3: Tighten the screws in a clockwise
direction to complete the installation.
Satco Products, Inc.
Brentwood, NY 11717