4. Once all dirt has been cleaned off, the surfaces should be washed with warm water and a mild deter-
gent. Difficult areas to access can be washed with a bottle-brush or similar.
5. Rinse immediately with cold water and dry all surfaces.
6. Clean the seat with a vinyl upholstery cleaner to conserve it both lustrous and flexible.
7. Once all cleaning operations have been completed, start the engine and allow it to idle for a few minu-
tes. In this way we will achieve complete drying all of the parts and, at the same time, leave all connec-
tions free from moisture.
STORAGE
Long-time storage of the motorbike requires certain precautions against deterioration. Once the machine
has been thoroughly cleaned it can be readied for storage as follows:
1. Drain all fuel from the tank, piping and carburator.
2. Lubricate all control cables.
3. Remove the spark plug and put a spoonful of SAE 15W40 oil in the cylinder head hole and replace
the spark plug.
4. Seal the exhaust pipe with a plastic bag to prevent the entry of moisture.
5. Remove the battery and charge it at least once a month. Be careful not to store the battery in a place
which is either too hot or too cold.
26