Before Installation; Safety Precaution - Whirlpool SPIW409/2 Instrucciones Para El Uso

INSTALLATION SERVICE

Before installation

1. Please read this manual carefully
before installation.
2. The appliance must be installed
according to national wiring rules
and according to this manual by
qualified technicians.
3. Any change of installation
position must be handled by
professionals;
4. Check the product to verify that
it has not been damaged before
installation.

SAFETY PRECAUTION

1. The power supply must be of
rated voltage with special
circuitry for the appliance. The
normal operating range of
voltage is 90%~110% of rated
voltage. The diameter of the
power cord must comply with
requirements.
2. The user power supply shall
have a reliable grounding
terminal. It is prohibited to
connect the grounding wire to
the following items:
1) Water Supply Pipe
2) Gas Pipe
3) Sewage Pipe
4) Other positions that are
considered unsafe.
5. Mount with the lowest moving
parts of indoor unit at least 2.5m
above floor or grade Level.
6. After installing, the consumer
must operate the appliance
correctly according to this
manual, keep a suitable storage
for maintenance and move of it
in the future.
3. Ensure safe grounding and a
grounding wire connected with
the special grounding system of
the building, installed by
professionals. The appliance
must be fitted with electrical
leakage protection switch and an
auxiliary circuit breaker with
sufficient capacity. The circuit
breaker must also have a
magnetic and a thermal tripping
function to ensure protection in
case of short-circuit and
overload.
Type Model
Split Inverter
47
Required Capacity
of air break switch
9/12K 16A
18K 20A
24K 25A