Russell Hobbs 19460-56 Instrucciones página 3

Ocultar thumbs Ver también para 19460-56:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
3 Read the instructions, keep them safe, pass them on if you pass the appliance on. Remove all packaging
before use.
A IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
1 This appliance can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have
been supervised/instructed and understand the hazards involved.
• Children must not use or play with the appliance.
• Keep the appliance and cable out of reach of children.
c Misuse of the appliance may cause injury.
s To avoid injury, take care handling the blades, emptying the jug, and
cleaning.
u Don't add hot liquid (over 40°C), as it may be ejected due to sudden
steaming.
2 Unplug the appliance before assembly, disassembly, or cleaning.
3 Don't leave the appliance unattended while plugged in.
4 If the cable is damaged, it must be replaced by the manufacturer, its
service agent, or someone similarly qualified, to avoid hazard.
, Don't try to move the lid or the jug while the motor is running
L Don't put the motor unit in liquid.
5 The appliance is fitted with a safety switch to prevent the motor operating unless the jug is in place and
the lid correctly fitted. Don't use this to switch the appliance on and off.
6 Don't run the motor continuously for more than 5 minutes, it may overheat. After 5 minutes switch off
for at least 2 minutes, to recover.
7 Don't use accessories or attachments other than those we supply.
8 Don't use the appliance for any purpose other than those described in these instructions.
9 Don't use the appliance if it's damaged or malfunctions.
DIAGRAMS
1 motor unit
0 1 off/pulse
1 continuous processing
2 spindle
L lock
U unlock
C PREPARATION
1 Sit the motor unit on a stable, level surface.
2 Fit the spindle to the top of the motor unit.
3 Sit the jug on the motor unit, with the handle to the right of the controls.
4 Turn the jug clockwise to bring the handle between the controls.
C FIT THE ACCESSORY
5 To process, fit the chopper over the pillar in the centre of the jug and turn it anti-clockwise to lock it in
place.
• To remove the chopper, turn it clockwise, and lift it out of the jug.
6 To grate or slice:
a) Lower the disc over the top of the spindle.
HOUSEHOLD USE ONLY
3 handle
4 jug
5 chopper
6 disc
7 slicer
K slicing
/ grating
3
8 safety switch
9 lid
10 tube
11 pusher
` dishwasher safe

Publicidad

Tabla de contenido
loading

Tabla de contenido