Service; Importer; Disposal - FLORABEST FBKS 52 A1 Traducción Del Manual De Instrucciones Original

Warranty claim procedure
To ensure quick processing of your case, please observe the following
instructions:
■ Please have the till receipt and the item number (e.g. IAN 12345)
available as proof of purchase.
■ You will find the item number on the type plate, an engraving on the
front page of the instructions (bottom left), or as a sticker on the rear or
bottom of the appliance.
■ If functional or other defects occur, please contact the service depart-
ment listed either by telephone or by e-mail.
■ You can return a defective product to us free of charge to the service
address that will be provided to you. Ensure that you enclose the proof
of purchase (till receipt) and information about what the defect is and
when it occurred.
You can download these instructions along with many other
manuals, product videos and software on www.lidl-service.com.

Service

Service Great Britain
Tel.: 0871 5000 720 (£ 0.10/Min.)
E-Mail: kompernass@lidl.co.uk
Service Ireland
Tel.: 1890 930 034
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
E-Mail: kompernass@lidl.ie
IAN 302393

Importer

Please note that the following address is not the service address. Please
use the service address provided in the operating instructions.
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
DE - 44867 BOCHUM
GERMANY
www.kompernass.com
FBKS 52 A1

Disposal

The packaging is made from environmentally friendly material
and can be disposed of at your local recycling plant. The appli-
ance and its accessories are made from various materials, such
as metal and plastic.
Your local community or municipal authorities can provide information on
how to dispose of the appliance.
Environmental protection
■ Carefully empty the petrol and oil tank and dispose of your appliance
at a recycling plant. The plastic and metal parts used can be separated
and recycled.
■ Dispose of waste oil and petrol at a waste collection centre and do not
dump these into the sewerage or drainage system.
■ Dispose of contaminated maintenance material and working materials
at a collection point provided for this purpose.
Dispose of the packaging in an environmentally friendly man-
ner.
Note the labelling on the packaging and separate the pack-
aging material components for disposal if necessary. The
packaging material is labelled with abbreviations (a) and
numbers (b) with the following meanings:
1–7: plastics,
20–22: paper and cardboard,
80–98: composites
Your local community or municipal authorities can provide
information on how to dispose of the worn-out product.
GB │ IE │
31 ■