Removing Transport Securing Device - Seca 717A Manual De Instrucciones Y Garantía

1. Congratulations!
English
In the seca 717A electronic baby scale
you have acquired a highly-accurate yet si-
multaneously sturdy piece of equipment.
seca has been putting its experience at the
service of health for over 150 years now,
and as market leader in many countries of
the world, is always setting new standards
with its innovative developments for weigh-
ing and measuring.
The seca 717A electronic baby scale is
designed for use in a doctor's surgery or
hospital. It serves both to determine
2. Safety
Before using the new scale, please take a little time to read the following safety instruc-
tions.
• Follow the safety instructions in the in-
struction manual.
• Use only the mains unit supplied.
• Do not drop the scale or subject it to
violent shocks.

3. Removing transport securing device

– Turn over the scale so that the base-
plate faces upwards.
– Unscrew both screws out of the base
of the scale and take off the transport
securing device.
– Turn the scale back up the right way.
Important!
Keep the transport securing device in a safe place, as the scale has to be secured
again to be transported any distance (see section entitled "Transport" on Page 18).
14
weight at birth and to check weight gained
during growth.
Its maximum capacity is 15 kg, the display
has a resolution of 5 g.
A special feature of this scale is that you
can switch between two weighing ranges.
Resolution in the lower weighing range is
2 g.
In addition, the scale has a HOLD function
to store the weight determined and a TARE
function so that additional weights such as
cloths or pads are ignored for weighing.
The scale has Class 3 CE approval.
• Have repairs carried out exclusively by
authorised persons.
• Have scale serviced and re-calibrated
on a regular basis (see chapter entitled
"Servicing/recalibration" on Page 19).
1.
2. 2. 2.
1.
2.