Intended Use - Scheppach wox d 700 Manual De Instrucciones

Setting-up and adjusting of the machine
• Setting-up, modifying, measuring as well as cleaning to be carried out only when motor is switched off. Pull out power plug and
wait for stagnation of the rotating tool.
• All protection and safety facilities have to be assembled again directly after repair and maintenance works have finished.
• Use only well sharpened, slit free and non-deformed saw blades.
m

Intended use

• The firewood circular saw and the supplied tool is exclusively constructed for the processing of wood.
• The machine complies with the valid EG Machines regulation
• The machine has only been constructed for one-shift operation. Duty cycle S 6 - 40%.
• The saw is exclusively constructed for transverse cutting of firewood of max. 1 m length.
• Independent of the wood diameter only one piece may be laid onto the rocker.
• Take notice of all safety and risk information of the machine.
• Keep all safety and risk information of the machine completely in readable condition.
• Upon usage in closed rooms the machine should be connected to an exhaust installation.
• Use the machine only in technical impeccable condition as well as according to its intended use, and in a safety - and danger
conscious manner with observance of the operational constructions! Immediately eliminate, or have eliminated, inparticular those
disorders that can harm safety!
• The safety, work and maintenance regulations of the producer as well as the measurments mentioned in the "Technical informa-
tion" must be abided by.
• Attention must be paid to the applicable prevention of accidents rules and to the other, generally accepted safety-related rules.
• The machine should only be used, maintained or repaired by people who are familiar with it and informed about the risks. Arbitrary
changes to the machine exclude liability of the manufacturer.
• The machine should only be used with original accessories, original extension tools and original saw blades of the manuf acturer.
• Every use surpassing this counts as non-intended use. In this case the manufacturer is not liable for damages caused; therefore
the user only bears the consequences.
Seite:72
GB