Hilti GX 90-WF Manual Del Usuario página 24

3 Description
3.1 Product overview
3.2 Intended use
The tool is for fastening wood to wood using specially manufactured fasteners. The tool is suitable for
use with solid wood, laminated timber, plywood, chipboard materials (e.g. coarse oriented-strand board),
fiberboard materials (e.g. medium density fiberboard), and veneer materials (e.g. Multiplex). The tool is
intended for use by professionals in the timber construction industry. For usage recommendations, consult
the Hilti Fastening Technology Manual.
The tool, gas can and fasteners form a single technical unit. This means that trouble-free fastening with this
tool can be ensured only when it is used together with the Hilti nails and Hilti gas cans specially manufactured
for it. The fastening and application recommendations made by Hilti apply only when these conditions are
observed. The tool is for hand-held use only. Do not tamper with or attempt to make alterations to the machine.
• For this product, use only the Hilti Li­ion batteries of the B7 series listed at the end of this documentation.
• For these batteries, use only the C7 battery charger approved by Hilti. More information is available from
your Hilti Store or from www.hilti.group
3.3 Bluetooth
This product is equipped with Bluetooth (optional).
Bluetooth is a wireless data transfer system by which the two Bluetooth-enabled products can communicate
with each other over a short distance.
3.4 Hibernation mode
The tool has a hibernation mode to protect the Li-ion battery from deep discharge. The tool switches
itself off completely, automatically, if unused for 120 minutes.
▶ To restore operational readiness, briefly remove the battery and reinsert it (battery reset).
3.5 Items supplied
Tool in case, 2 batteries, charger, cleaning cloth, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
3.6 System components for operating the tool
The following items are required to use the tool: Tool, charged B7 / 1.5 Li-ion battery, GC 31 or GC 32 gas
can and GX-WF nails for wood.
16 English
1
Tool body
@
Grip
;
Nosepiece
=
Magazine
%
Rating plate
&
Gas can compartment
(
Battery
)
Air vents
+
Casing cover
§
Trigger
/
Adjusting wheel
:
Nail pusher
∙
Belt hook
$
LED
£
Adapter for surface protection
|
Sliding sleeve
¡
440645
*440645*