Manufacturer's Warranty; Further Information - Hilti GX 90-WF Manual Del Usuario

Malfunction
Fan does not start, LED
shows green
The fan is running, the tool
does not fire
The tool can not be pressed
against the work surface
Frequent transport
malfunctions with nails in
plastic strips
10 Disposal
WARNING
Risk of injury due to incorrect disposal! Health hazards due to escaping gases or liquids.
▶ DO NOT send batteries through the mail!
▶ Cover the terminals with a non-conductive material (such as electrical tape) to prevent short circuiting.
▶ Dispose of your battery out of the reach of children.
▶ Dispose of the battery at your Hilti Store, or consult your local governmental garbage disposal or public
health and safety resources for disposal instructions.
Most of the materials from which Hilti products are manufactured can be recycled. The materials must be
correctly separated before they can be recycled. In many countries, your old tools, machines or appliances
can be returned to Hilti for recycling. Ask Hilti Service or your Hilti sales representative for further information.
▶ Do not dispose of power tools, electronic equipment or batteries as household waste!
11

Manufacturer's warranty

▶ Please contact your local Hilti representative if you have questions about the warranty conditions.
12

Further information

For more information on operation,
qr.hilti.com/manual/?id=440645
This link is also to be found at the end of the documentation, in the form of a QR code.
*440645*
Possible cause
Plug connector to the fan is dis-
connected
The fan connector is fitted cor-
rectly but the fan still doesn't start.
Empty gas can
Tool has reached its target life of
40,000 fasteners driven.
Less than 5 nails in the magazine
Nails jammed
Damaged magazine strip
technology,
440645
Action to be taken
▶ Remove the battery and the gas
can.
▶ Plug in the fan connector.
▶ Have the tool repaired by Hilti
Service.
▶ Prepare the gas can. → page 18
▶ Insert the gas can. → page 18
▶ Clean the tool. → page 21
▶ Reload the nail strip.
▶ Remove the battery and the gas
can.
▶ N.B.: Do not carry out any
maintenance work without fully
unloading the tool.
▶ Remove jammed nails.
▶ Hold the nail pusher firmly when
operating.
environment and recycling, follow this link:
English 23