Datos Técnicos; Tekniske Data; Technisce Daten - ZF 4-1 M Manual De Utilización

X DATOS TÉCNICOS
Technical Data for pleasure craft
Based on engine power B to DIN 6270; shock factor
K = 1.25 to applied, if engine has fewer than 4 cylinders.
MODEL RATIO
«A» Pos «B»Pos
ZF 12 M 2.136 1.955
2.632 1.955
Technical Data for Pleasure Craft Duty
Based on engine power B to DIN 6270; shock factor
K = 1.25 to applied, if engine has 1 cylinder / K = 1.20 for 2 cylinders / K = 1.15 for 3 cylinders
** Max. 120 Nm (88.5 ft lb) admissible for main travelling direction with gear lever set to «B»
MODEL RATIO
«A» Pos «B»Pos
ZF 15 M 1.556 1.955
1.875 1.955
«A» POS = continuous running position (normally AHEAD).
«B» POS = reverse position.
B/W = Borg Warner adaptor.
Note = For all «M» (Mechanical) transmissions reduce power capacity by the following shock factors: 1 cylinder engine ÷ 1.25, 2 cylinder engine ÷ 1.20, 3 cylinder engine ÷ 1.15.
Owner's Manual ZF M
X TEKNISKE DATA
POWER / RPM INPUT POWER CAPACITY
kW hp kW hp
2800 rpm
0.0131 0.0176 37 49
0.0111 0.0149 31 42
POWER / RPM INPUT POWER CAPACITY
kW hp kW
2800 rpm
0.0152 0.0204 43 57
kW hp kW hp
3000 rpm 3600 rpm
39 53 47 63
33 45 40 54
hp kW hp kW hp
3000 rpm 3600 rpm
46 61 55 73
X TECHNISCE DATEN
MAX WEIGHT BELL HSGS.
RPM kg lb AND NOTES
5000 13 29
SAE 4, 5, B/W
5000
Max input power 55 kW
MAX WEIGHT BELL HSGS.
RPM kg lb AND NOTES
5000 13 29
SAE 4, 5, B/W, Yanmar JH
Max input power 55 kW.
Ratio 1.556 «B» Pos.
max torque 120 Nm.
Ratio 1.875 «B» Pos.
max torque 120 Nm.
41