Control Panel - Dräger Mobile Printer BT Instrucciones De Uso

en
|
Use
4.2

Control panel

For further information see: "Status, Signals, Effects, and Remedy",
page 32.
OK button
Paper feed button
Rechargeable battery status LED (green or red)
28
Turns the printer on/off.
● Press the button for two seconds.
 The printer is on.
This is signaled by all LEDs lighting up briefly
and a short double beep.
It is turned off in the same way.
For manual paper feed.
It can also be used to carry out a self-test.
Dräger Mobile Printer BT