Performing Bluetooth ® Pairing And Initial Connection - Dräger Mobile Printer BT Instrucciones De Uso

Error LED (red)
®
Bluetooth LED (blue)
4.3 Performing Bluetooth
Connection
Follow the instructions for use of the device used.
The printer can be paired with multiple devices.
The device itself can be paired with multiple printers.
To select a printer for printing, refer to the instructions for use of the
device used.
When a Bluetooth
printer and device must be paired; This means that both devices
exchange characteristic data so that they automatically recognize
each other the next time they connect.
Prerequisite:
Dräger Mobile Printer BT
The green LED flashes slowly when the recharge-
able battery status is < 50 %.
The red LED lights up when the rechargeable bat-
tery is empty.
When the charger is connected, the green LED
flashes during the charging process.
When the charger is connected, the green LED
lights up when the rechargeable battery is fully
charged.
The LED lights up red when the paper cover is
open.
The LED flashes red when the printer paper is used
up or the print head is overheated.
If the printer is ready to communicate with a Blue-
®
tooth device, the LED lights up blue.
®
connection is established for the first time, the
®
Pairing and Initial
Use | en
29