Printing Results; Troubleshooting; Self-Test - Dräger Mobile Printer BT Instrucciones De Uso

4.4

Printing Results

The measurement results of a compatible Dräger device (e.g., Dräger
®
Alcotest 7000) can be printed out.
Follow the instructions for use of the device used.
Prerequisite:
– The printer and device have been paired.
– A Bluetooth
and the device.
– The measurement result is shown on the display of the device.
● Select the
 The printing process starts and the measurement result is printed
out.
5

Troubleshooting

5.1

Self-test

If there is a problem, perform a printer self-test.
If the self-test did not detect a problem with the printer, the other
(peripheral) devices and software must be checked.
To carry out a self-test:
1. Turn off the printer and close the paper cover.
2. Press and hold the paper feed button and OK button on the printer
simultaneously.
3. After the printing process has started, release both buttons.
4. Press the paper feed button again to get a printout of the ASCII
pattern.
 The self-test ends automatically after the ASCII pattern has
been printed.
Dräger Mobile Printer BT
®
connection has been established between the printer
button on the device.
Troubleshooting | en
31