Maintenance And Cleaning; Declaration Of Conformity - Würth RL 3 Instrucciones Para El Manejo

RL 3.book Seite 19 Mittwoch, 19. November 2008 9:14 09

Maintenance and Cleaning

J Clean the laser exit regularly using cotton swabs.
Watch for fuzz residue.
J Always keep the unit clean.
J Wipe off dirt with a damp, soft cloth. Do not use
aggressive cleaning agents or solvents.
If the machine should happen to fail despite the care
taken in manufacture and testing, repair should be
carried out by an authorized customer service agent
for Würth power tools.
For all correspondence and spare parts orders, al-
ways include the article number on the type plate of
the machine.
For the current spare parts list of this machine, log
into the Internet under
"http://www.wuerth.com/partsmanager" or ask
for a copy at your nearest Würth branch office.
Environmental Protection
Recycle raw materials instead of dis-
posing as waste
The machine, accessories and pack-
aging should be sorted for environ-
mental-friendly recycling.
The plastic components are labelled for categorized
recycling.
Guarantee
For this Würth machine, we provide a guarantee in
accordance with statutory/country-specific regula-
tions from the date of purchase (proof of purchase
by invoice or delivery note). Damage that has oc-
curred will be corrected by replacement or repair.
Damage caused by normal wear, overloading or
improper handling is excluded from the guarantee.
Claims can only be accepted if the power tool is sent
undisassembled to a Würth branch office, your
Würth sales representative or a customer service
agent for Würth compressed-air and power tools.

Declaration of Conformity

We declare under our sole responsibility that this
product is in conformity with the following standards
or standardization documents:
EN 61000-4-2:2001; EN 61000-4-3:2003;
EN 55022:2007 according to the provisions of the
directives 2004/108/EW, 89/336/EWG.
We further confirm that upon leaving the factory, the
laser level (series number Page 3) corresponds with
the listed specifications. All devices are subject to a
100 % inspection; the individual data are deposited
by us.
08
Adolf Würth GmbH & Co. KG
P. Zürn
Subject to change without notice
A. Kräutle
19