For Your Safety - Würth RL 3 Instrucciones Para El Manejo

RL 3.book Seite 13 Mittwoch, 19. November 2008 9:14 09
GB
Working safely with this unit is pos-
sible only when the operating and
safety information are read com-
pletely and the instructions con-
tained therein are strictly followed.
Laser radiation of laser class 3R
625 – 645 nm, <5.0 mW,
according to EN 60 825-1: 2001
Do not look into the laser beam.
Do not point the laser beam at per-
sons or animals.
Because of the narrow concentration
of the laser beam, also pay attention
to where the laser beam is pointed at
longer distances.
J Do not look into the laser beam and do not un-
necessarily aim the beam at other persons or
animals. The natural corneal reflex is not a suf-
ficient protective measure.
J Do not look into the laser beam with optical
aids, such as, e. g., binoculars. Optical aids
can focus the laser beam in a dangerous man-
ner for the eye.
J Do not mistake laser viewing glasses with la-
Product Elements
1 Rotation head
2 Laser beam exit
3 Levelling indicator
4 Speed selection button
5 Battery charged state indicator
6 On/Off button
7 Direction button, down
8 Direction button, up
9 Manual/standby button
10 Manual/height alarm (HI) indicator)
11 Scan button
12 Infra-red receiver
13 Carrying handle
14 Battery compartment cover

For Your Safety

ser protection glasses. They are used only for
better viewing of the laser beam in bright light.
J Do not make the type plate on the device un-
recognisable. Missing information of the laser
class can lead to careless handling of the device
on behalf of the user.
J Keep the device out of the reach of children.
They can cause danger to themselves and to
others.
J Never open the device yourself. The laser
beam is dangerous for the eyes. Have damages
repaired only through an authorized Würth
customer service agent.
J Protect the tool against moisture. The penetra-
tion of moisture causes damage to the electron-
ics. Always store and transport the tool in the
protective casing.Other optical equipment/de-
vices can be subject to disturbance due to re-
flected diffused light. Check if any other optical
equipment/devices are in the vicinity.
J Use only original Würth accessories. Usage of
accessories that are not recommended can lead
to incorrect measured values.
J Do not drill into housing or attach rivets in order
to mark the machine. Use stickers.
15 Tripod receptacle 5/8"
16 Rubber feet
17 Type plate
18 Plumb notch
19 Remote control
20 Right direction button
21 Left direction button
22 Lock lever for laser
23 Guide adapter
24 Read-off edge
25 Height scale
26 Fastening hole
27 Clamping lever
28 Wall mount
Not all the accessories illustrated or described are included in
standard delivery.
13