How to Program Automatic Brew
NOTE: Green LED will illuminate to indicate PROGRAM is activated. Green LED
light will turn off when the unit begins to brew at the preprogrammed time.
1. While holding PROGRAM
button, press HOUR and
MINUTE buttons until desired
brewing time is reached.
Tips for Best-Tasting Coffee
• All coffees are made from either arabica beans or robusta
beans, or some combination of both. Arabica beans are slightly
more expensive, but tend to produce better-tasting coffee.
• Ground coffee will become stale much faster than whole beans.
If buying preground coffee, chose a package with the latest
expiration date or a smaller quantity.
• If grinding whole beans, set your coffee grinder on a fine/
medium grind. This will yield the best-tasting grounds. Try to
use freshly ground coffee within about a week of grinding.
8
840183103 ENv05.indd 8
2. Once desired brewing time
has been reached, release
PROGRAM and current time is
displayed.
3. Press and release PROGRAM
again to activate automatic
brew.
• Using a water filter, filtered water, or bottled water will yield
better-tasting coffee than tap water.
• Use approximately 1 tablespoon (15 ml) of grounds for each
cup of coffee being made. To avoid overflow, use about 1/3 less
grounds when brewing decaf or flavored coffees.
• Make sure your coffee maker is clean. See "Care and Cleaning"
section.
11/11/2016 11:08:01 AM