BlueAnt T2 ENDURE Manual Del Usuario página 8

9
Up to 2 phones can connect to the T2 at the same time. To pair a
second phone:
1. Use your phone's Bluetooth menu to disconnect the existing paired
phone from the T2.
2. With the T2 switched on, hold down the
T2 starts to talk you through the pairing process.
3. When the pairing is complete, use the Bluetooth menu on each
phone to reconnect them to the T2.
When you have 2 phones connected, you can always answer a call on
either phone. If you initiate a call through the T2, or activate phone
voice dialing, it will happen on the "primary phone": the one that
connected to the T2 fi rst.
T2_User_Guide_EN.indd 8
Multipoint
Command button until the
10
The T2 sup
device supp
music or an
on the phon
The audio w
and resum
Note:
primary ph
11
If you are h
again:
1. Disconne
your pho
2. Turn you
3. With the
down all
about 3 s
The T2 will
to pair your
2/2/2012 7:19:42 PM
Lis
The T
Res