SilverStone TS07 Manual página 7

lNSTALLATION GUIDE
Finish Installation
1.
Pull the HDD tray back into the casing until tray
and the casing are fitted securely.
Safety Remove the Device
Whatever kind of OS (Windows XP / Vista / 7, Mac OS 10.x, etc) you are using, please follow the steps as shown
below to remove the external case safety.
Double click on green arrow icon at right down corner of screen.
Windows will pop out a dialog box to ask if you would like to safety remove this device.
You can remove this portable enclosure easily by above steps.
Troubleshooting
Check the version of OS you are using is matching our product.
Please make sure all cables are properly connected.
Make sure the AC/DC adapter is in proper condition.
If use a brand new HDD, please configure the HDD by Disk Manage.
If you can't install or remove the problem, please do not take the HDD enclosure apart.
Contact the local distributor for further assistance.
Caution
Make sure the accessories are complete.
If be not sire whether your computer OS matched this device or not, please update your OS.
Keep the device out of high temperature and humid environment.
Keep the device away from any cover when using.
If the PC or this storage case is damaged by improper operation, we will not take the responsibility
for any compensation or maintenance.
2.
Push the release switch back to its original position.
Installation is done.
EN
6