Panasonic Palmcorder PalmSight PV-L591 Instrucciones De Operación página 20

Playing Back Recordings
TV Playback or Viewing
Connect Camcorder to a TV to view
playback or recordings in progress.
Connections
Audio/
Video Out
VCR Playback using PlayPak
1
Load Battery in PlayPak
Remove Battery lid
and insert AA
battery.
• Do not reverse
polarity.
• Replace battery when tape loading/
unloading takes longer than usual.
3
Remove
20
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Cassette
a
Slide RELEASE
and wait for lid to
open.
b
Push cassette
out through
hole in bottom of
PlayPak with
your finger.
Before you begin...
• Connect Camcorder to power source.
• Make all TV-Camcorder connections.
1
Set POWER to:
© view playback.
VCR
CAMERA © view picture as it is
recorded.
2
Turn TV ON and set to LINE INPUT.
See TV owner's manual.
3
Begin playback or recording.
2
Insert
a
b
c
• Do not obstruct cassette reel while loading.
• Allow PlayPak Load Detector to fully retract
before using in VHS VCR.
Load Detector
Cassette in PlayPak
Turn cassette
Tape Wheel in
direction of arrow to
take up any slack.
Slide RELEASE to
open cassette lid.
Insert the
cassette with the
window up and on the
left, then snap lid shut.