Cequent Performance Products PRO Serie Manual De Instrucciones página 3

Bicycle Loading:
1. Load inner bicycle first. Pull bail pins and rotate center tubes down as illustrated. (Fig 7)
2. Load bicycle into Wheel Cradles. Adjust cradles to appropriate position. Ensure tire is well supported at both ends of Wheel
Cradles. Tighten cradles to prevent movement. (Fig 8)
3. Rotate center tube to vertical position and lock with bail pin. Lower Frame Hook assembly down over bicycle frame as
illustrated. (Fig 9)
4. Apply downward pressure to bicycle and Frame Hook assembly. Tighten Frame Hook assembly and ensure there is no
movement of bicycle.
FIGURE 7
FIGURE 9
Cequent Performance Products, Inc.
Plymouth, MI 48170
Technical Service: (888) 521-0510
ITEM: 63138
DESCRIPTION: Q-Slot 4 Bike Rack
Page 3 of 15
FIGURE 8
63138N Rev D 6-29-12
Printed in China