Sauder Costa 419958 Instrucciones De Montaje página 29

Step 24
If you purchased the 419959 Credenza, open
å
the box, locate the 419959 Credenza TOP (V)
and lay it on packing foam or magazines fl at on
the fl oor.
With a drill and 3/16" drill bit, fi nish drilling
å
through the four holes shown.
Drill through these
two small holes.
If you purchased the 419956 L-Desk, open the
å
box, locate the TOP (X) and RETURN TOP (Y)
and lay them on packing foam or magazines fl at
on the fl oor as shown.
With a drill and 3/16" drill bit, fi nish drilling
å
through the four holes shown based on your
Diagram 1 or 2 preference in step 22.
Drill through these two
small holes for Diagram 2
confi guration.
Drill through these two
small holes for Diagram 1
confi guration.
www.sauder.com/services
Drill through these
two small holes.
Drill through these two
small holes for Diagram 1
confi guration.
These eight
holes must
be here.
419958
CAUTION
Make sure you
have packing
foam or throw
away material
underneath the
tops near the drill
area.
CAUTION
Make sure you
have packing
foam or throw
away material
underneath the
tops near the drill
area.
Drill through these two
small holes for Diagram 2
confi guration.
Page 29