Black 9/16" Large Head Screw - Sauder Costa 419958 Instrucciones De Montaje

Step 14
Push two RUBBER SLEEVES (2R) over the posts of the
å
PIVOT HINGES (15H).
Fasten two PIVOT HINGES (15H) to the TOP MOLDING (K).
å
Use two BLACK 9/16" LARGE HEAD SCREWS (1S).
Fasten six METAL BRACKETS (4G) to the TOP MOLDING (K).
å
Use six BLACK 9/16" LARGE HEAD SCREWS (1S).
NOTE: Be sure the BRACKETS are even with the edges of
å
the TOP MOLDING.
These two holes must be
closer to the front edge.
Page 18

BLACK 9/16" LARGE HEAD SCREW

4G
2R
K
419958
1S
(8 used in this step)
15H
4G
www.sauder.com/services