Power Supply - Siemens mobic t8 Guía Rápida

English
3.1

Power Supply

The following power supplies were tested for the charging cradle/station:
Type
VDC/VDC
VAC/VDC
!
!
!
Page 8
Name
Car adapter, VDN60A -1600
Car adapter, VDC60B-1600
MOBIC T8 power pack with cable
MOBIC T8 Plug-in power pack
CAUTION
When using other power packs or direct voltage feed, ensure the
values specified in the "Technical Data" chapter are not exceeded
and the charging cradle/charging station not damaged.
CAUTION
The power pack plug to the connection on the charging cradle/
charging station must correspond to the plug specification in the
"Technical Data" chapter.
CAUTION
Short circuit and polarity reversal
The input voltage (16 VDC) for the charging cradle/charging station
must be protected against polarity reversal, short circuit and over-
voltage. When using the tested power packs, this is ensured by the
structure in accordance with the conditions. No liability will be ac-
cepted for defective equipment or damage caused by third parties.
A5E00184282
Quick Start Manual
Input voltage
12 VDC
24 VCD
100-240 VAC
100-240 VAC
MOBIC T8 Charging Cradle / Charging Station