Remote Control - Bose VIDEOBAR VB1 Manual Del Usuario

Remote Control

The Bose Videobar VB1 includes an infrared remote control that enables you to adjust
camera and volume settings, mute the microphones, and put the VB1 in Bluetooth
pairing mode.
Note: All remote-control functions are also available in the software apps that enable
you to configure the Bose Videobar VB1. See Software Applications (Page 23) for
more information.
q w
r
t
e
r
y
u
i o
P R OD UC T D ETA I L S
1. Mute: Mute/unmute the VB1 microphones.
2. Bluetooth : Press and hold for 3 seconds to enter
pairing mode. If already paired to a device, press and
hold to disconnect.
3. Camera Pan: Press to pan the camera left and right (<
e
or >), or press and hold for continuous adjustment.
4. Camera Tilt: Press to tilt the camera up and down (Λ or
V), or press and hold for continuous adjustment.
y
5. Home Preset: Return Pan, Tilt, and Zoom (PTZ) camera
settings to the Home position. The Home position can
be changed in the Bose Work Configuration app.
6. Presets 1 & 2: Press to select Preset 1 or 2 for the
camera. Press and hold to save the current Pan, Tilt,
and Zoom (PTZ) camera settings as Preset 1 or 2.
7. Autoframe: Turn autoframing on/off. When on, the
pan, tilt, and zoom (PTZ) camera settings will adjust
automatically to include all participants in the field of
view at all times.
8. Volume: Raise or lower volume (+ or −).
9. Camera Zoom: Increase or decrease (+ or −) the zoom
ratio of the camera.
|
3 0 E N