Starting A Meeting - Bose VIDEOBAR VB1 Manual Del Usuario

OPERATION

Starting a Meeting

Note: The host computer must have the latest DisplayLink® driver installed, and the
VB1 must have its DisplayLink setting enabled (disabled by default) for the HDMI
output to function. Visit displaylink.com/downloads to download the latest driver.
Enable or disable the DisplayLink setting using the Bose Work Configuration app or
WebUI or Bose Work Management app (see Software Applications (Page 23)).
To start a meeting using the VB1:
1. Connect the included USB cable between the VB1 and your computer. Use the
included USB C-to-A adapter, if needed.
2. Start the meeting in your preferred meeting software.
3. In the device settings of your meeting software, select Bose Videobar VB1 as the
device for the microphone, speakers, and camera.
To make a call using the VB1 as a speakerphone:
1. Press the Bluetooth button on the side of the VB1 (or press and hold the Bluetooth
button on the remote control for 3 seconds) to put the VB1 into pairing mode.
2. On your mobile device, scan for available Bluetooth devices and select the VB1.
3. Make a call from your mobile device. The audio will be automatically routed from
your mobile device to the VB1 speakers and microphones.
OP ER ATI O N
|
3 4 E N