Low-Power Modes - Bose VIDEOBAR VB1 Manual Del Usuario

Low-Power Modes

Some countries' energy regulations require products like the VB1 to enter a low-power
mode when not in use to save energy. You can disable (or re-enable) this feature
in the VB1 by using the Bose Work Configuration app or WebUI or the Bose Work
Management app (see Software Applications (Page 23)).
The low-power mode of the VB1 is actually two stages: a standby mode and a low-
power standby mode.
If the low-power mode is enabled, the VB1 will enter the standby mode after 18
minutes of inactivity. After 2 more hours of inactivity, it will enter the low-power
standby mode. In both modes, the light bar on the front of the VB1 will be off.
If the low-power mode is disabled, both of these modes are also disabled.
Certain actions or commands can prevent the VB1 from entering its standby mode,
"wake" the VB1 from its standby mode (returning it to normal operation), or "wake"
the VB1 from its low-power standby mode (returning it to normal operation).
Action or Command
Button press Mute or Bluetooth button
on the side of the VB1
Any button on the remote
control
USB
Connecting device to
USB-C port
Communication from Bose
Work Configuration app
or WebUI
Audio playback
Bluetooth
Active connection
Audio playback
Wi-Fi or
Communication from Bose
Ethernet
Work Configuration app
or WebUI
Communication from Bose
Work Management app
HDMI Display
Computer connected to
HDMI Display port with
DisplayLink enabled
Audio In Audio playback
OP ER ATI O N
Prevents the VB1
from entering its
standby mode.










|
4 0 E N
"Wakes" the "Wakes" the VB1
VB1 from its from its low-power
standby mode. standby mode.












