Assemble The Trimmer Head; Transportation And Storage; Move The Machine; Store The Machine - GreenWorks 82T16 Manual Del Operador

EN
10.7

ASSEMBLE THE TRIMMER HEAD

1. Put the trimmer head onto the housing.
2. Install the nut.
3. Put the metal rod in the specified angle transmission hole
to fix the trimmer head.
4. Tighten the nut on the trimmer head counterclockwise
with a wrench.
You must install the cut-off blade when you use the trimmer
head.
11 TRANSPORTATION AND
STORAGE
11.1

MOVE THE MACHINE

When you move the machine, you must:
• Wear gloves.
• Stop the machine.
• Remove the battery pack and charge it.
• Assemble the blade guard.
11.2

STORE THE MACHINE

• Remove the battery pack from the machine.
• Make sure that children cannot come near the machine.
• Keep the machine away from corrosive agents such as
garden chemicals and de-icing salts.
• Secure the machine during transportion to prevent
damage or injury. Clean and examine the machine for any
damage.
12

TECHNICAL DATA

Type
Motor
No load speed
J
22
D
E
IMPORTANT
Cordless, battery powered
82V DC, Brushless
4500-5500-6000-6500 ±10%
RPM
English
Cutting line diameter
Cutting path diameter
Feed Type
Weight (without battery
pack)
The recommended ambient temperature range:
Item
String trimmer storage tem-
perature range
String trimmer operation
temperature range
Battery charging temperature
range
Charger operation tempera-
ture range
Battery storage temperature
range
Battery discharging tempera-
ture range
13

TROUBLESHOOTING

Problem Possible Cause
The ma- No electrical con-
chine does tact between the
not start machine and the
when you battery pack.
push the
trigger.
The battery pack is
depleted.
The lock-out but-
ton and trigger are
not pushed at the
same time.
12
0.094" (2.4 mm)
16" (406 mm)
Bump Feed
4.45 kg
Temperature
-4°F (-20°C) - 158°F (70°C)
6.8°F (-14°C) - 104°F (40°C)
39°F (4°C) - 104°F (40°C)
39°F (4°C) - 113°F (45°C)
1 year: 32°F (0°C) - 73°F
(23°C)
3 month: 32°F (0°C) - 113°F
(45°C)
1 month: 32°F (0°C) - 140°F
(60°C)
6.8°F (-14°C) - 113°F (45°C)
Solution
1. Remove battery pack.
2. Check contact and in-
stall the battery pack
again.
Charge the battery pack.
1. Pull the lock-out but-
ton and hold it.
2. Pull the trigger to start
the machine.