Moulinex HV9 ME740 Manual De Instrucciones página 23

CAUTION: the safety precautions are part of the appliance. Read them
carefully before using your new appliance for the first time. Keep them
in a place where you can find and refer to them later on.
DESCRIPTION
A Removable mincer head
A1 Aluminium casing
A2 Feed Screw
A3 Self-sharpening stainless steel cutter
A4 Perforated plates (depending on model)
A4a Small holes perforated plate
(2,4 mm) for very fine mincing
A4b Small holes perforated plate
(3 mm) for very fine mincing
A4c Medium holes perforated plate
(4.7 mm) for fine mincing
A4d Large holes perforated plate
(8 mm) for coarse mincing
A5 Aluminum Nut
B Removable tray
C Meat pusher
D Motor unit
E Accessory storage cover
F Mincer head unlock button
RECOMMENDATIONS
Before using your appliance for the first time, wash all accessories in soapy water. Rinse
and dry them carefully.
The perforated plate and cutter must remain greased. Coat them with cooking oil.
Do not switch on the appliance when it is empty or if the mincer plates are not greased.
Never push down into the tubes using your fingers or any utensil.
Do not operate your appliance for more than 14 min.
USE : MINCER HEAD
Prepare the entire quantity of food to be minced, remove any bones, gristle and tendons.
Cut the meat into cubes (approximately 2cm X 2cm).
Never push down into the tube using your fingers or any utensil.
Tip: At the end of the operation, you can feed a few pieces of bread into the feed tube
to clear any meat remaining in the machine.
G On/Off switch (0-1)
H "Reverse"
movement)
I Kebbe accessory (depending on model)
I1 Nozzle
I2 Ring
J Sausage accessory (depending on model)
J1 Screw adjuster
J2 Funnel
K Vegetable cutter (depending on model)
K1 Drum holder/feed tube
K2 Pusher
K3 Drums (depending on model)
(SEE FIG. 1 TO 6)
23
button
K3a Grating drum
K3b Slicer drum
K3c Fine grating drum (see fig 30)
K3d Dicer drum
K3e Dicing attachment
EN
(short reverse