Replacing The Batteries - geberit Sigma10 Instrucciones De Uso

EN
Maintenance

Replacing the batteries

If power is supplied to the Geberit WC flush
control by batteries, they must be replaced
after approx. two years.
A skilled person can be called to replace the
batteries, or the user/operator can do this
himself by following the steps below.
Maintenance tools
• Size 2 Torx® key (only with screwed
actuator plates)
• Size 3 PH screwdriver
Replacing the batteries
Prerequisites
Two replacement batteries (type 1,5 V
"Mono"/"D"/"LR20"/"AM-1") are handy and
the WC lid is closed.
1
2 mm
16
2
3
4
PH 3
2
1
B1074-002 © 04-2013
966.230.00.0 (01)