DJI COPILOT BOSS Serie Guía De Instalación Rápida página 13

Manually detect a mobile device
Some mobile phones and tablets are not detected by
DJI Copilot when connected to the tethered cable. If
your device is not detected, try the following:
1 Wait for DJI Copilot to enter power-saving
mode (the LCD has no content).
2. Apply a short push (1 second) to the action
button to display DJI Copilot's status.
3. Apply a long push (3 seconds) to the action
button.
4. The LCD displays a prompt ("On?"). Apply a
short push to the action button to confirm.
Manually detect a USB device
for Easy copy
Some USB devices and SD cards are not autodetected
for Easy copy after pushing the action button twice.
The status screen appears but the USB icon is not lit
and there is no prompt to copy. You may encounter
this issue with USB devices that have an independent
power source (such as a power supply or battery).
To manually detect a USB device for Easy copy:
1 Wait for DJI Copilot to enter power-saving
mode (the LCD has no content).
2 Apply three short pushes to the action
button. The second and third pushes must be
within 2 seconds of the previous push.
3 Once DJI Copilot wakes ups, the LCD prompts
you to confirm or cancel the copy. Apply a
short push to the action button to confirm or
a long push to cancel.
13