Comunello Automation FORT 400 Manual Del Usuario página 25

• Dig a hole for the counter-frame, preparing the necessary tubes to make the connections from the electrical manhole (FIG. 2A).
FIG. 2A
m m
3 5 0
• Introduce a counter-frame larger than the mounting plate and insert it in the hole. The counter-frame must protrude by 50 mm above the ground
(FIG. 2B).
• Insert an iron grid inside the counter-frame to reinforce the cement (FIG. 2C).
• Fill the counter-frame with cement; wait at least 24h hours for it to solidify.
FIG. 2C
FIG. 2B
FIG. 3A FIG. 3B
COMUNELLO ®Copyright 2020 - All rights reserved
25