Black+Decker FLEX BDH2020FLAAPB Manual De Instrucciones página 8

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English
Fig. I
5. Pull the dust container to the side, away from the base
of the appliance.
6. Remove the pleated filter 
pulling firmly as shown in Figure J.
7. Tap the filters vigorously to remove loose dust.
Fig. J
8. If necessary, wash the filters 
water as shown in Figure K.
Fig. K
6
 21 
from the pre-filter 
 20 
21
20
 20 
 21 
in warm, soapy
9. Make sure that the filter is completely dry before
refitting it to the appliance.
10. Refit the pleated filter into the plastic pre-filter.
Cleaning the Dust Container (Fig. A, K–M)
1. Unwrap the hose 
of the appliance.
2. Push and hold the release button on the opposite side
of the handle from the dust container door 
3. Rotate the handle toward the back of the appliance as
shown in Figure L.
4. Pull the dust container to the side, away from the base
of the appliance.
Fig. L
by
5. Remove the pre-filter 
appliance by twisting the filter to the right and pulling it
from the appliance.
6. Once filters are removed, wipe the removable
bowl 
 10 
and pre-filter with a damp cloth, or rinse with
warm soapy water as shown in Figure M, and allow
to dry completely.
Fig. M
10
 4 
and handle 
 2 
from the main part
 20 
and filter 
 21 
from the
20
 5 
.

Publicidad

Tabla de contenido
loading

Tabla de contenido