Installation Steps - LUND Eclipse Hood Scoop Instrucciones De Instalación

Installation Steps

Clean painted surface of hood where scoop will
Alcohol
Prep
attach with alcohol pad.
Pad
Manufactured for Auto Ventshade
Lawrenceville, GA
masking
tape
Peel back 2" of tape liner from each end of front flange.
2"
5cm
Remove adhesive tape to adhere inserts to hood scoop.
• Wash only with mild soap & dry with a clean cloth.
You have purchased one of the many quality Lund™ branded products offered by Lund International, Inc. We take the utmost pride in our products
and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in terms of
fit, durability, finish and ease of installation.
NOTE: Actual application may vary slightly from illustrations.
Alcohol
Prep
Pad
Manufactured for Auto Ventshade
Lawrenceville, GA
OR
Lund International, Lund Accessories Division
300 Horizon Drive, Suwanee, GA 30024
800-328-5863 • Visit us at lundinternational.com
© 2005 Lund International, Inc. All rights reserved.
Lund and the Lund logo are trademarks of Lund International, Inc.
TM TM
Apply primer stick to the hood's surface, inside of the
masking
tape
Position scoop on hood and apply pressure to exposed tape.
In its final position, remove remaining tape by pulling on free
ends. Apply pressure to all edges to ensure adhesion.
Adhere decal to side of hood scoop.
Page 2 of 2
masking tape.