Lcd Contrast Setting; Time Zone Setting - Technoline WS9040 Manual De Instrucciones

LCD CONTRAST SETTING:

The LCD contrast can be set within 8 levels, from LCD 0 to LCD7 (Default setting is LCD 4):
1. Press and hold the SET key until the digit starts flashing.
2. Use the OUT/+ key to view all levels of contrast.
3. Select the desired LCD contrast. Confirm with the SET key and enter in the Time Zone setting.

TIME ZONE SETTING:

The time zone default of the weather station is "0". To set a different time zone:
1. The current time zone value starts flashing.
2. Use the OUT/+ key to set the time zone. The range runs from 0 to -12 and then runs from +12 back to
0 in consecutive 1-hour intervals.
Last digit flashing
Flashing
52