Lcd Contrast Setting; Manual Time Setting - Technoline WS 2816 Manual De Instrucciones

1. LCD contrast setting

2. Manual time setting

3. 12/24 hour time display
4. Calendar setting
5. °F/ °C temperature unit setting
6. Wind speed unit
7. Rainfall unit setting
8. Air pressure unit setting
9. Relative pressure reference value setting
10. Weather tendency threshold value
11. Storm warning threshold value
12. Storm alarm On/ Off setting
13. Wind direction display type
14. Factory Reset
LCD CONTRAST SETTING
The LCD contrast can be set within 8 levels, from "Lcd 1" to "Lcd 8" (default setting is
"Lcd 5"):
1. Press and hold the SET key for 3 seconds, the contrast level digit will start
flashing.
2. Press the ▲UP ARROW key or ▼DOWN ARROW key to adjust the level of
contrast.
3. Press the SET key to confirm and to enter the MANUAL TIME SETTING.
MANUAL TIME SETTING
The time will be updated automatically with the time from the computer when the display
is synchronized with the USB transceiver and connected to the Heavy Weather Pro
software. The time can also be set manually by following the steps below:
1. The hour digit is flashing.
47