Installation; Using The Adapter; Display Properties - Tripp-Lite U244-001-VGA Manual Del Propietário

2. Installation

Note: This product features built-in drivers that install
automatically upon connection to a computer with an active
network connection. If they do not install, or do not fully
install, you can obtain the driver file from the included CD or
tripplite.com/support.
1. Connect the built-in USB cable on the display
2. Connect the display adapter to a monitor using a
3. Once connected, the computer will recognize the
Note: It may take a few moments for the screen to appear on
the add-on monitor. Also, it is normal for the screen to flicker
on and off a few times when first connected. If the add-on
monitor remains blank, you may need to restart your computer.

3. Using the Adapter

3.1 Display Properties

Once installed, the computer video can be Extended
from the primary display to the add-on display, Mirrored
to display the same thing on both, or changed to use
the add-on display as the primary display. This can be
done by opening the Display Settings page on your
computer (see next page) and changing the settings.
19_11_119_9339B0_BOOK.indb 5 19_11_119_9339B0_BOOK.indb 5
adapter to an available USB 2.0 port on your
computer.
VGA cable, such as Tripp Lite's P502-Series High
Resolution VGA Cables.
display adapter and complete the installation. The
video signal should now display on the add-on
monitor.
5
12/30/2019 9:53:56 AM 12/30/2019 9:53:56 AM