Festo CPA-VI-MP Serie Manual De Instrucciones página 17

4 Accessories
Accessory
Multipin socket
Ready-to-use multipin cable
Screw locking (if used with
commercially available
sub-D plug)
Identification signs
Fastening for hat rail
(clamping element)
Wall fastening
Fit the screw locking
If commercially-available sub-D sockets are used, the
slotted head screws of the multipin plug must be replaced
by screw lockings type UNC4-40 in order that the sockets
can be fastened.
Please note
Replace in each case one of the slotted head screws of
the multipin plug after the other with the screw lock-
ings. Otherwise there is a danger of the sub-D plug fal-
ling into the housing.
Festo CPA..-...-VI-MP-... 0208a English
Type
SD-SUB-D-BU...
KEA1-25P-... (IP65),
KMP4-25P-... (IP65),
KMP6-25P-... (IP20)
UNC4-40
IBS6x10
CPA-BG-NRH
Screws M4 x 25 mm
4,5 4
17